What you need to get started:
- An account with True Vine Online
- Your assigned tvo# username
- Your password
- Your Local Calling Group Access number
- The Primary & Secondary DNS numbers
or you can print out the iMAC Internet Connection Wizard tutorial.
| iMAC Internet Setup Assistant
What you need to get started:
or you can print out the iMAC Internet Connection Wizard tutorial. |
|
iMAC - Step 1
Open up the Assistants folder
and double click on the Internet Setup Assistant icon.
Click on Yes to continue.
iMAC - Step 2
iMAC - Step 3
iMAC - Step 4
You will need to enter in a name
for this configuration. Also ensure that modem is checked before
continuing.
Enter in the name as shown above,
and click the right arrow
iMAC - Step 5
Select the modem you are using from the drop down list above. Ensure you have the correct port selected and tone is selected and then click on the right arrow
iMAC - Step 6
Enter in your Local Call Access number for your calling group, your tvo# username and your password in the spaces provided ( as shown above ). Once you have done this, click on the right arrow
iMAC - Step 7
Ensure that No is checked and click on the right arrow
iMAC - Step 8
There is no IP Configuration so ensure No is selected and click on the right arrow
iMAC - Step 9
Enter in the DNS addresses for your calling group, as well as the Domain Name as shown above and then click the right arrow
iMAC - Step 10
Enter in your email address and your password in the spaces provided ( as shown above ) and click on the right arrow
iMAC - Step 11
Enter in the POP as shown
above and ensure you replace your-username with your username
( For example, if my name was Bill Smith and my username was bsmith
my POP would be [email protected] ) and you will also need
to enter in the SMTP of which details are shown in the above graphic.
Once you have done this, click on
the right arrow
iMAC - Step 12
Leave the News address blank and click on the right arrow
iMAC - Step 13
You have now finished configuring
your iMAC for connection to the internet. To complete your Internet Settings,
click Go Ahead. To connect later, you can either use the Remote
Access section of the Control Strip, or you can use the Remote Access Control
Panel.